STUDY OF THE PROCESS OF LOADING AND LEVELING A HEAP OF ALFALFA SEEDS ONTO A DRYER CONVEYOR
Keywords:
unevenness, magnitude, leveling, pile, dryer, factor, screening experiment, planning, regression coefficient, criteria, optimal value, interval calibration.Abstract
This article presents in detail the results of a study conducted to determine the optimal combination of factors selected to determine the minimum coefficient of unevenness of loading and leveling of quail seed mixtures in conveyor dryers during the loading process into the dryer. In addition, the expressions for determining the regression coefficient, calculating the Fisher and Student tests, the results of statistical evaluation of the regression coefficient (vi), and the results of comparing the absolute value of the regression coefficient and their confidence intervals (∆vi) are presented.
Downloads
References
Melnikov S.V., Aleshkin V.R., Roshchin P.M. Experimental planning in agricultural process research.- L.: Kolos, 1980.- 168 p.
Brodsky V.Z. Introduction to factorial experimental planning.M.: Nauka, 1976.- 222 p.
Adler Yu.P., Markova E.V., Granovsky O.V. Experimental planning in searching for optimal conditions. - 2nd revised and supplemented ed. M.: Nauka, 1976. - 273 p.
Razzakov T.Kh. Dosing of clover heap layer in conveyor dryers and substantiation of loader parameters. Diss. Cand. of Technical Sciences. – Gorki, 1988.- 210.
Razzakov T.Kh., Toshtemirov S.Zh., Ergashev G.Kh. Justification of the design parameters of the finger elements of the working element of the loader of conveyor dryers. //Akademy. Scientific journal. No. 5 (56). Russia - 2020-P.4-7
Razzakov T.Kh., Ergashev G.Kh., Toshtemirov S.Zh. Analysis of the process of interaction of the working element of the loader with the mass of a heap of grass // “Science, technology and education”. Scientific journal. - No. 2 (77). Russia. -2021 –P.21-251.
T. X. Razzokov, S. J. Toshtemirov, Sh.A. Latipov Physico - mechanical properties of the seed pile of foddercrops.//CONMECHYDRO2022. IV- International scientific conference Construction mechanics, hydraulics & Water Resources engineering. https://doi.org/10.1051/e3sconf/202336504027
T.X.Razzokov, S.J.Toshtemirov, A.Z.Kiyamov. The results of experimental studies of the working body of the loader pile of forder crops.E3S Web of Conferences 410, 05028 (2023). https://doi.org/10.1051/e3sconf/202341005028
Farmon Mamatov, Bakhadir Mirzaev, Akmal Karimov, Tura Razzokov, Shavkat Azizov and Golib Shodmonov. Potato digger with a digging workpart of the "Paraplaw" type//“.//CONMECHYDRO 2022 IV- International scientific conference Construction mechanics, hydraulics & Water Resources Engineering.
Mamatov F.M., Rustamova N.R., Norchaev R., Karimov. A, Razzokov T. X and Hamroev O J. Kinematic mode of operation of the potato harvester auger. // CONMECHYDRO 2022. IV-International scientific conference Construction mechanics, hydraulics & Water Resources engineering.
Alimova Z.X., Kholikova N.A., Kholova S.O., K.G. (2021,October). Influence of the antioxidant properties of ubricants on the wear of agricultural machinery parts. In IOP Conference Series: Earth and Environmental Science (Vol. 868, No. 1, p. 012037). IOP Publishing.
Batirov Z., Toirov I. and Razzakov T. Technology of ridge formation on cotton fields with simultaneous fertilization. E3S Web of Conferences 365, 04008 (2023)
A. Kiyamov., D. Norchayev., T. Razzakov. Parameters of the comb – forming machine with elastic rods. IOP Conference Series: Materials Science and Engineering Justification of machine parameters for ridge forming with simultaneous application offertilizers. 2021
I. J. Toirov, Z. L. Batirov*, and T. Razzakov. Physical and mechanical properties of anaerobic sealants. E3S Web of Conferences 401, 03015 (2023) CONMECHYDRO-2023 ttps://doi.org/10.1051/e3sconf/202340103015
Alimova Z., Akhmatjanov R., Kholikova N., Karimova K.G (2021). Ways to improve the anticorrosive properties of motor oils used in vehicles. In E3S Web of Conferences (Vol. 264, p. 05004). EDP Sciences.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All content published in the Journal of Applied Science and Social Science (JASSS) is protected by copyright. Authors retain the copyright to their work, and grant JASSS the right to publish the work under a Creative Commons Attribution License (CC BY). This license allows others to distribute, remix, adapt, and build upon the work, even commercially, as long as they credit the author(s) for the original creation.
