EFFECTIVE USE OF LAND PREPARATION TECHNIQUES FOR PLANTING

Abstract

 In the article, the working body of the current leveling of crop fields, the base leveling scoop front disc softener working bodies were used. In order to form a plane, which is required when leveling the fields of the crop with such working bodies, the leveler aggregate is formed in the transition from one to two. This will prevent further condensation of the soil, resulting in providing the plain with the required level of agrotechnics of the crop areas. This requires additional softening of the crop areas before planting after such leveling. In this experiments were conducted on average sandy areas of the irrigated mechanical composition of the Bukhara region. As a function of conducting experiments, issues such as the technological process of working with a drive mounted on a ground leveler, the structure of the soil pile before the junction, the bulk weight of the field drive layer, the hardness, the aggregate composition of the soil, the plane of the field surface and the measurement of the resistance of the aggregate to gravity The change in the cross-profile of the soil pile at different speeds of leveling aggregate was studied during the experiment and as a result observed a decrease in the high speeds of the cross-sectional profile, changing in relation to the speed of the cross-sectional surface of the soil pile.This situation is scientifically illuminated by such issues as the fact that at high speeds of the aggregate the soil in front of the junction occurs on account of intensive loading, at small speeds the above process occurs relatively slowly, there is no blockage of the incisions to the disc softeners.