ENHANCING CORROSION RESISTANCE OF COMPOSITE MATERIALS
Keywords:
composite materials, corrosion resistance, surface coating, nano-fillers, hybrid reinforcementAbstract
Composite materials are widely used in aerospace, automotive, and marine industries due to their high strength-to-weight ratio and tailored mechanical properties. However, exposure to aggressive environments such as salts, acids, and humid conditions often leads to corrosion of both matrix and reinforcement, limiting their durability. This study investigates the strategies for improving the corrosion resistance of composite materials, including surface coatings, matrix modification, and reinforcement treatment. Experimental and literature-based analysis indicates that surface coatings, nano-fillers, and hybrid reinforcements significantly enhance corrosion resistance without compromising mechanical performance. The results provide practical guidelines for the design of durable composite materials for industrial applications.
Downloads
References
Jumaboy, T., Bobur, S., Ulugbek, N., & Otabek, N. (2021). Research Solution of the Problem of Forming a Flat Structure of Finite Width from a High-Temperature Melt. Annals of the Romanian Society for Cell Biology, 25(6), 312–317.
Tavbaev, J., Saparov, B., Payzieva, M., Narmanov, O., & Narmanov, U. (2021). Modeling Theory of Acquisition Mode Materials of High-Strength Flexible Structures. International Journal of Mechanical Engineering, 6(3), 43–46.
Tavbaev, J., Saparov, B., & Kholikulov, E. (2021). Solution of the Boundary Value Problem of a Semi-Infinite Waveguide. Galaxy International Interdisciplinary Research Journal, 9(11), 201–204.
Bobur, S., Murodullo, R., Husnora, S., & Sevinchoy, G. (2021). Advances in Manufacturing Technology. American Journal of Education and Learning, 3, 3.
Bobur, S., Murodullo, R., Husnora, S., & Sevinchoy, G. (2021). Efficiency of Manufacturing Processes Using Modern Materials for Product Development: A Review. International Journal of Education, Social Science & Humanities, Finland, 3.
Lutfullaeva, N., Egamberdiev, E., Ergashev, Y., Alamov, U., & Shamuratova, S. (2024). Physico-Chemical Research of the Processes of Hydration of Cements. E3S Web of Conferences, 497, 02034.
Saparov, B. J., Kodirov, A. U., Tavbaev, Zh. S., & Shernaev, A. N. (2021). Analytical Study of Longitudinal Tension of an Elastic-Plastic Matrix with a Rigid Elastic-Plastic Inclusion. Universum: Technical Sciences, 42–45.
Saparov, B., Rakhimov, M., & Sokhibov, K. (2025). Investigation of Mechanical Properties of New Composite and Nanomaterials. International Journal of Artificial Intelligence, 1(1), 830–832.
Saparov, B., Rakhimov, M., & Sokhibov, Kh. (2025). Mathematical Modeling of Acoustic Processes: A Numerical and Analytical Approach. International Multidisciplinary Journal of Research and Development, 1(1).
Bobur, S., Murodullo, R., Husnora, S., & Sevinchoy, G. (2025). New-Generation Composite Materials: Advances in Manufacturing Technology. American Journal of Education and Learning, 3(2), 571–577.
Tavbaeva, J., Shernaev, A., & Saparov, B. (2025). The Influence of Material Properties, Geometric Shape of the Section, and Temperature on the Stressed State of Working Bodies. Journal of Engineering Sciences and Modern Technologies, 1(1).
Jumaboy, T., Bobur, S., Akhliyor, E., Gulom, S., & Akbar, K. (2024). Study of Plastic Zones of Rod and Matrix. AIP Conference Proceedings, 3045(1), 040003.
Saparov, B., Rakhimov, M., Mamatqulova, D., & Sangirov, A. (2024). Study of the Brittle-Elastic Matrix and Deformations in the Struts. IMRAS, 7(2), 126–132.
Tavbaev, Zh. S., Saparov, B. J., Shamanov, G. Z., & Erkinov, A. K. (2023). Formulation of the Thermoelasticity Problem for a Rod–Inclusion and Rock–Matrix System. Science and Innovation, 2(CAFET), 1–7.
Tuhtasheva, M. N., Saparov, B. J., & Normurodov, S. E. (2022). Technological Regimes for Processing Antistatic, Thermally Conductive, Anti-Friction, Wear-Resistant, and Nanocomposite Polymer Materials. Universum: Technical Sciences, 26–29.
Tavbaeva, F. Zh., & Tavbaev, Zh. S. (2020). Methods for Strengthening and Studying the Properties of Viscoelastic Materials. Uz Academia Scientific Journal, 3.
Saparov, B. J., & Shernaev, A. N. (2020). Calculation of the Invariant G–Integral. Composite Materials: Scientific, Technical and Practical Journal, 3.
Saparov, B. J., Sheralieva, O. A., Kholikulov, E. B., & Tavbaev, Zh. S. (2020). Model of Steady-State Destruction of Cylindrical Bodies of Arbitrary Profile. BGTU.
Rakhimov, M. Yu., Shernaev, A. N., & Tavbaev, Zh. S. (2018). Solution of the Problem of Forming a Flat Structure of Finite Width from High-Temperature Melt. Composite Materials: Scientific, Technical and Practical Journal, 3, 79–81.
Saparov, B. J., & Shernaev, A. N. (2018). Study of Cracks in Brittle Inclusions and Matrices. Composite Materials: Scientific, Technical and Practical Journal, 2, 14–18.
Saparov, B. J. (2017). Study of Plastic Zones in an Elastic Rod in an Ideal Elastic-Plastic Matrix. Composite Materials: Scientific, Technical and Practical Journal, 3, 23–26.
Saparov, B. J. (2015). Transverse Stretching of a Soft Elastic-Plastic Rod Textile Material. Problems of Textiles, 3.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All content published in the Journal of Applied Science and Social Science (JASSS) is protected by copyright. Authors retain the copyright to their work, and grant JASSS the right to publish the work under a Creative Commons Attribution License (CC BY). This license allows others to distribute, remix, adapt, and build upon the work, even commercially, as long as they credit the author(s) for the original creation.
