RESEARCH AND ANALYSIS OF FLUXES FOR SURFACING TRAVELING WHEELS OF OVERHEAD CRANES
Keywords:
Key words: ceramic fluxes, surfacing, welding, melt, Scat,Abstract
Abstract: The article deals with the issue of surfacing under the ceramic flux of the wheels of overhead cranes. Worn parts cause the machines to work with a deviation from the specified parameters, reduce the efficiency of the machines, lead to the emergence of additional load units of the machines, due to which it leads to a deterioration in the working conditions and weakening of the mechanisms of the machines. To prevent these shortcomings of worn parts, submerged arc surfacing is used in place of replacement with new ones, which is economically beneficial.
Downloads
References
Qosimov, K., Xoshimov, X., Yо‘ldashev, S., & Ashurboyev, J. (2019). RESEARCH OF THE CHEMICAL COMPOSITION OF THE WORKING SURFACE OF THE GIN GRATE WHICH IS RESTORED BY WELDING. Textile Journal of Uzbekistan, 8(1), 26-31.
Хошимов, Х. Х., & Юлдашев, Ш. Х. (2019). Восстановление изношенных колосников при производстве хлопка в хлопчатобумажной промышленности (Doctoral dissertation, Белорусско-Российский университет).
Косимов, К. З., Муйдинов, А. Ш., & Хошимов, Х. Х. (2017). Перспективы восстановления изношенных деталей машин наплавкой композиционных порошковых материалов. Вестник Башкирского государственного аграрного университета, (3), 54-59.
Хошимов, Х. Х., & Абдуллаев, Ш. А. (2023). ПРЕДОТВРАЩЕНИЕ ПОЯВЛЕНИЯ ПОРИ В СВАРНОМ ШВЕ. Новости образования: исследование в XXI веке, 1(6), 699-708.
Хошимов, Х. Х. (2023). Раскисление сварных швов. Новости образования: исследование в XXI веке, 1(6), 709-718.
Xashimov, X. Х. (2023). Respublikamizda qo‘llanilayotgan ekskavatorlarning cho‘mich tishlarini abraziv yeyilishga qarshi ishlashini asoslash. Educational Research in Universal Sciences, 2(1 SPECIAL), 386-391.
Xamidjanovich, X. X. (2022). Improvement of the working chamber of the saw gin. ACADEMICIA: An International Multidisciplinary Research Journal, 12(4), 297-299.
Xamidjanovich, X. X., QoChqarboyevich, I. M., Azimovich, A. S., & OGLi, X. F. B. (2021). Restoration Erosion Working Surface Of Gin Rib By Welding Process. The American Journal of Engineering and Technology, 3(06), 153-159.
Хошимов, Х. Х., & Абдуллаев, Ш. А. (2023). Эритиб қоплаш усулининг оптимал режимларини тахлили. Новости образования: исследование в XXI веке, 1(6), 774-785.
Xoshimov, X., Yuldashev, S., Muydinov, A., & Kosimov, K. (2024, March). Analysis and results of the conducted research work to increase the resource of the ginning rib. In AIP Conference Proceedings (Vol. 3045, No. 1). AIP Publishing.
Daminjon o’g’li, O. E., & Xamidjonovich, X. X. (2023). VERTIKAL SILINDRIK REZERVUARLARNI TURLI QISMLARINI PAYVANDLAB TAYYORLASH TEXNOLOGIK JARAYONINI ISHLAB CHIQISH. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 18(6), 133-135.
Xamidjanovich, X. X. (2023). PAYVANDLAB QOPLANGAN YUZALARGA TERMIK ISHLOV BERISHNING OZIGA XOS XUSUSIYATLARI VA TOBLASHNING METAL STRUKTURASI VA QATTIQLIGIGA TA’SIRI. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 16(2), 62-64.
Xamidovich, X. X., Avazjon ogli, X. X., & Qutbiddin o‘g‘li, Z. D. (2023). KERAMIK FLYSLARNI ISHLAB CHIQARISH TEXNOLOGIYASINI LOYIHALASH. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 16(2), 79-81.
Xamidjanovich, X. X. (2023). PAYVAND BALKALARNI TO’XTOVSIZ ISHLAB CHIQARISH TEXNOLOGIYASINI LOYIHALASH. ОБРАЗОВАНИЕ НАУКА И ИННОВАЦИОННЫЕ ИДЕИ В МИРЕ, 16(1), 77-80.
ugli, R. J. S. (2024). By Welding Increase in Working Resource of Gin Colosniks that Working Surface is Woren. American Journal of Engineering , Mechanics and Architecture (2993-2637), 2(3), 24–28. Retrieved from https://grnjournal.us/index.php/AJEMA/article/view/3607
RUZIBOYEV, J., & XASHIMOV, X. (2023). Chigitli paxtani jinlash jarayonining bugungi kundagi ahamiyati. ANDIJON MASHINASOZLIK INSTITUTI.
Алижонова, Х. А. (2023). ПАЙВАНДЛАБ ҚОПЛАНГАН ЭКСКАВАТОР ЧЎМИЧ ТИШЛАРИНИ ИҚТИСОДИЙ БАҲОЛАШ. O'ZBEKISTONDA FANLARARO INNOVATSIYALAR VA ILMIY TADQIQOTLAR JURNALI, 2(15), 401-410.
Yuldashev, S. K., & Masharipov, M. N. (2020). RECOVERY OF WORN PARTS BY ELECTRODES. Journal of Tashkent Institute of Railway Engineers, 16(3), 149-153.
Qosimov, K., & Sh, Y. (2019). Erosion of the working surface of the metal to weld sheeting with the metal powder and surpassing solid for metals’ erosion. International Journal of Advanced Research in Science, Engineering and Technology, 6(10), 11147-11152.
Косимов, К. З., & Муйдинов, А. Ш. (2019). Пути управления сроком службы восстановленных деталей машин (Doctoral dissertation, Белорусско-Российский университет).
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All content published in the Journal of Applied Science and Social Science (JASSS) is protected by copyright. Authors retain the copyright to their work, and grant JASSS the right to publish the work under a Creative Commons Attribution License (CC BY). This license allows others to distribute, remix, adapt, and build upon the work, even commercially, as long as they credit the author(s) for the original creation.
